2020/7/21 8:06:49

in the United States where there are selling|custom watch bracelet

General size (adult): 8 "(L) x 1/2" (W) x 1/16"(H) or (202MM x 12MM x 2MM) Women"s size (adult): 7.5 "(L) x 1/2" (W) x 1/16"(H) or 190 MM x 12MM x 2MM) General size (children): 7 "(L) x 1/2" (W) x 1/16"(H) or (180MM x 12MM x 2MM) 61/2 "(L) x 1/2" (W) x 1/16"(H) or (165MM x 12MM x 2MM) The maximum screen printed and engraving arcustom watch braceletea for adults is 7.677"X 0.334" The maximum area of screen printing and engraving for children is 7.00"X 0.334" As for width, commonly used are: 1/4 "or 6MM 1/2 "or 12MM 3/5 "or 15MM 3/4 "or 19MM 1 "or 25MM             bracelet-silicone-personnalise-montrealembossed-wristbands

t is a kind of color silicone jewelry that is more avant-garde and popular. Among them, no big-name stars use it as their decorations, making you cool and full of flavor! As for the production process of silicone wristband, it is estimated that not many people have fully understood it. Pinshang Silicone explains the whole production process of silicone wristband. Design of artwork The design of artwork is generally based on the size of the sample artwork provided by the customer. Graphic drawing software, such as CDR or AI software, is generally used to make the artwork. If the customer cannot provide the sample artwork, we can cooperate with the customer to complete the design and production of the artwork free of charge according to the customer"s requirements. Open mold The mold opening is that the mold master creates an offset plate according to the designed artwork, then uses the offset plate to carve a copper worker, and finally carves a steel mold with the copper worker. Some hand ring craft moulds have a relatively high technical content and take a relatively long time to produce. Generally, the mold opening period is calculated by five days. With the mould, the production will be quick. Toner refining According to the color number on the international Pantone color card specified by the customer, our color mixing ratio is aligned and the color difference is minimal. Approval materials The materials required for each wristband are weighed by an electronic scale. Generally, the wristband weighs about 5.5 grams. Upper diecustom watch bracelet production After the mould is finished, it is produced on the machine. After the mold is installed, the machine needs to be warmed up. A 9-mold machine produces about 15000 pieces per day. Quality inspection After the wristband is produced, the product shall be inspected and checked, mainly to see if it meets the specifications. If it does not meet the specifications, it will be discarded. deburring Each wristband is produced with a residual edge. After the quality inspection department passes the inspection, the product is sent to the post-process department for trimming. (Average trimming quantity per person per day is about 3,000 pieces). Finished product inspection After the edge is repaired, the finished product is obtained. It is also necessary to send the finished products back to the quality inspection department to check the trimming quality. If there are any unqualified products, they will be scrapped. Packaging After the repaired products pass the inspection, they shall be packaged according to the customer"s requirements. Packaging is divided into PP bag independent packaging and naked packaging. Both are 100 pieces in a pack. Usually 20 packs per carton (2,000 pieces) are standard export containers. Packing is generally required by customers. Inspection before sealing After the packaging is completed, the quality inspection department will check the quantity. if there is no problem, seal the case and send it to the warehouse for delivery.             silicone-wristbands-size-chart

zed silicone bracelets. It would be a good exercise to take the time to understand the different types of basics of silicone bracelets that many online companies offer. In general, there are basically four types of bracelets available for customers. There are embossed, debossed, screen printed, and laser-printed basics of silicone bracelets. They are explained as follows: Embossed basics of silicone bracelets. Even though they are not as possible as debossed or printed bracelets, they are definitely a good option for those whom want to put uniqueness and style onto their bracelets. As well as the embossed basics of silicone bracelets, embossed bracelets are able to incorporate any type of design and message. They require a mould to be manufactured, sometimes, basics of silicone bracelets manufacturers store these steel moulds for the regular clients. Debossed basics of silicone bracelets The LIVESTRONG is the most representative bracelet of the debossed style. Here the term “debossed” refers to the message letters that are actually carved on the bracelet. Manufacturers use a steel mould to create the personalized messages for every client. At the very beginning, these basics of silicone bracelets were more costly and took longer to manufacture than any other bracelets. However, expert manufacturers have simplified the production of these steel moulds as well as the basics of silicone bracelets themselves.             jelly-band-silicone-medical-alert-bracelet

digital silicone bracelets